![](/dspace/image/A1611B3B-A4C4-41D8-943D-76FAB6407511.png)
Please use this identifier to cite or link to this item:
http://www.repository.rmutt.ac.th/xmlui/handle/123456789/1087
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Nitipong Panklang | |
dc.contributor.author | Nathabhat Phankong | |
dc.contributor.author | Krischonme Bhumkittipich | |
dc.date.accessioned | 2014-01-15T06:39:28Z | |
dc.date.accessioned | 2020-09-24T04:33:15Z | - |
dc.date.available | 2014-01-15T06:39:28Z | |
dc.date.available | 2020-09-24T04:33:15Z | - |
dc.date.issued | 2011 | |
dc.identifier.uri | http://www.repository.rmutt.ac.th/dspace/handle/123456789/1087 | - |
dc.description.abstract | This research presents a design of transformer bushing insulation at high-voltage wire connection side. The bushing insulator is made from composite materials between natural rubber (NR) and high-density polyethylene (HDPE). The HDPE has been utilized to increase a weather resistance property of natural rubber, such as ultraviolet resistance, temperature, heat resistance, and so on. The blend ratio of materials depends on NR 60% and HDPE 40%. To study properties of insulator material, it is tested by using ASTM D2240 ASTM D412, ASTM D257-99 and ASTM D149-05 standard. The test results shown that the composite material has a tensile strength equal to 4.28+5.4 MPa, volume resistivity more than 2.14X10[superscript16]cm and surface resistivity about 5.56x10[superscript16] square. This insulation material can be withstanding a maximum AC power frequency voltage about 19.7 kV/mm. In additional to design, the electric field distribution around the bushing insulator is analyzed by using a finite element method (FEM). The highest electric field strength occurs at wire connector and equal to 0.95 kV/mm. Finally, the developed bushing insulator has been installed on 33 kV distribution systems at Saraburi province. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Rajamangala University of Technology Thanyaburi. Faculty of engineering | en_US |
dc.subject | Transformer bushing | en_US |
dc.subject | Natural rubber | en_US |
dc.subject | High density polyethylene | en_US |
dc.subject | Finite element method | en_US |
dc.subject | Electric transformer industry | en_US |
dc.title | Design of 33 kV Transformer Bushing Insulator from NR and HDPE | en_US |
dc.type | journal | en_US |
Appears in Collections: | บทความ (Article - EN) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Design of 33 kV Transformer Bushing Insulator from NR and HDPE.pdf | 1.41 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.